Hot selling valve Hydraulic valve test bench
Introduction:
The SST-H600 hydraulic valve test bench is based on our company's many years technology of producing valve testing equipment, strictly in accordance with the ISO9001 quality management system for management and production. According to GB/T13927-2008 "General Valve Pressure Test", GB/T26480-2011 "Valve Test and Inspection" and AP1598 American Standard and other relevant standards.
The hydraulic valve test bench is a combination of hydraulic, mechanical, electrical and medium storage cycle. It has the advantages of reasonable structure, perfect function, stable performance and high degree of automation. At the same time, it is widely used in the test of high, medium and low pressure sealing and strength of straight through flange or welded valve with nominal diameter of DN300-600mm. It is also used in valve manufacturing, petroleum and petrochemical industry Natural gas, water supply and drainage engineering, power plants, valve repair stations and other industries the most ideal valve test equipment.
SST-H600 model instruction and working principle
1 Hydraulic valve test bench consists of hydraulic system, electrical control system, high & low pressure water pump pressure supply device system, oil pressure, water pressure instrument system, control valve system, clamping table system and hydraulic medium storage circulating water tank. The test process and results meet the relevant regulations and requirements.
2 The test bench adopts end face O-ring seal, and the jacking oil cylinder is directly tightened by the end face of the valve tested. The jacking oil cylinder is directly driven by hydraulic pressure. It can be pushed in and out in the axial direction without the limitation of structure length. There is a large distance between the pull rods and is not limited by the diameter of valve flange.
3 The high-pressure water pump is powered by 4-7bar air pressure system, and automatically reverses by electric control reversing valve, which makes the high-pressure pump automatically reciprocating. The pressure is continuously supplied to the tested valve by using the exchange of water suction check valve and outlet check valve, which meets the pressure requirements of the tested valve.
4 Working process: According to the valve's nominal diameter and adjust the compression pressure of the oil cylinder(refer to the pressure comparison table)--compress the work-piece--turn on the low pressure water pump for quick water injection--turn on the high pressure water pump--turn on the pressure holding timer--pressure relief, reset.
5 Set the compression oil cylinder and the medium pressure interlock function: when there is pressure in the test valve cavity, the compression oil cylinder cannot be loosened. Prevent operation failure play a protective role in the wrong time.
6 The buyer need to prepare 46# anti-wear hydraulic oil, 8bar air source and cable
Mainly parameter:
Meet DN300-600 flanged gate valve, ball valve, stop valve.
1. Test valve type: straight-through flanged gate valve, ball valve, globe valve.
2. Clamping method: the hydraulic cylinder is horizontally pressed and the end face is sealed, which has minimal influence on the external force of the valve.
3. Sealing method of valve and blind plate: O-ring seal on the end face.
4. Pressure test medium: water or 4-7bar air pressure test.
5. Complete the test items: 1.5 times the nominal pressure of the water pressure shell pressure test, 1.1 times the nominal pressure of the high pressure water seal test, 4-7bar low pressure air tightness test.
6. Test range: DN300-600, see the pressure test range table.
7. Test valve structure length: 457-1143mm. Maximum meeting diameter: 915mm
8. The distance between the sealing discs: 400-1250mm.
9. The distance between the tie rods: 1100mm.
10. Top pressure oil cylinder: ∅280mm.
11. Maximum top pressure: 150 tons.
Pressure testing range:
Straight-through flanged gate valve, ball valve, stop valve.
| Diameter |
Nominal pressure |
Pressure test range |
| DN300 |
1.6-4.0MPa |
1.6-6.0MPa |
| DN350 |
1.6-4.0MPa |
1.6-6.0MPa |
| DN400 |
1.6-4.0MPa |
1.6-6.0MPa |
| DN450 |
1.6-4.0MPa |
1.6-6.0MPa |
| DN500 |
1.6-2.5MPa |
1.6-3.75MPa |
| DN600 |
1.6-2.5MPa |
1.6-3.75MPa |
Equipment structure outline:
Function configuration of water and gas pipeline:
2. The water and gas pipeline is designed with two-way pressure inlet and pressure relief, and the designed pressure holding time is up to the sound and light alarm.
Dongguan Suncenter Fluid Control Equipment Co., Ltd is the member company of Suncenter Group, which is located in Dongguan city of Guangdong province in China. With more than 15 years experiences in fluid pressure exchange and controlling field, we provide various kinds of pneumatic and hydraulic booster pumps, systems and solutions to the customers all over the world. Due to our best product quality, competitive price as well as excellent after-sales service, we have win a great reputation in the field.
Our main products including:
High Pressure Booster Pumps (Air Driven Gas Booster Pump, Air Driven Liquid Pump, Air Amplifiers)
High Pressure Systems (Gas/Liquid Booster Stations,FM200 filling machine, Tube Expanding Machine)
High Pressure Test Equipment(Hydraulic/Burst/Hydrostatic test machine,Cylinder test machine,
Valve test bench,Impulse Testing Machine, etc.)
Product Application
Oil Industry, Gas Industry, Chemical Industry, Fire Fighting, Research Institutions etc.
Our service
13 months' free warranty since the purchasing date and free technical support during lifetime
Audited Supplier 
){kind=link}
){kind=link}