Suncenter Valve Strainer Testing Machine

• Customization: Available

Product Description

1. Overview:
The production of SST-H600 Model Valve Test Bench is based on our company's years of experience of valve testing equipment and in accordance with the ISO9001 quality management system. The products comply with GB/T13927-2008 "General Valve Pressure Test", GB/T26480-2011 "Testing and Inspection of Valves" and API598 American Standard and other relevant standards.
The test bench integrates hydraulic, mechanical, electrical, and medium storage and circulation systems. It has the advantages of fine structure, complete functions, stable performance, and highly automatic. It is widely used for testing the high, medium, and low pressure sealing and strength of through flange valves with a nominal diameter of DN200-600mm. It is the most suitable valve testing equipment for valve manufacturing, petroleum and petrochemical, natural gas, water supply and drainage engineering, and power plants, etc.

2. SST-H600 Structure and Working Principle:
1). SST-H600 Model Valve Test Bench consists of a hydraulic system, electrical control system, high and low pressure water pump pressure supply device system, oil pressure, water pressure instrument system, control valve system, clamping workbench system and hydraulic medium storage and circulation water tank. The testing process and results comply with relevant regulations and requirements.
2). Test bench with end face O-ring seal, the end face of the tested valve is pressed directly by the top pressure cylinder, the top pressure cylinder is directly driven by hydraulic pressure, the axial direction can move forward and backward, which is not limited by the length of the structure. A large distance between the pull rods, which is not limited by the diameter of the valve flange.
3). High-pressure water pump by 4-7bar air pressure system for power, through the electrical control reversing valve automatic direction, so that the high-pressure water cylinder (pump) automatic reciprocating motion work, the use of water suction check valve and water check valve interchangeable constantly to the test valve pressure, to achieve the pressure required by the test valve requirements.
4). Working process: Adjust the oil cylinder pressing pressure according to the nominal diameter and pressure of the valve (refer to the pressure comparison table) --- press the workpiece --- open the low water pump for quick water injection --- open the high pressure pump --- maintaining pressure and timing --- unload the pressure and reset.
5). Interlocking between the pressure cylinder and the medium pressure: When there is pressure in the valve chamber during testing, the compression cylinder cannot be loosened, which serves as a protective measure in case of incorrect operation.
6). The user needs to prepare 46# anti-wear hydraulic oil, cable and 8 bar air supply.
7). Equipped with a pair of flat blind discs, other sealing discs to be prepared by the user.


3. Main Parameters:
1. Test valve types: Flange or welded valves
2. Clamping method: Horizontal top pressuring of oil cylinder, end face seal or inner seal, minimal influence on external forces on the valve body
3. Valve and blind plate sealing method: O-ring seal
4. Test pressure medium: Water or 4-7bar air pressure test.
5. Test items: 1.5 times the nominal pressure shell test, 1.1 times the nominal pressure high-pressure liquid seal test, 4-7 bar low-pressure gas-tight test.
6. Test range: DN200-600, refer to the pressure test range table
7. Sealing disc spacing: 500-1500mm;  
8. Internal spacing of pull rod: 1100mm;
9. Top pressure oil cylinder: Ø540mm
10. Maximum clamping force: 600 tons




4. Pressure Testing Range: Straight-through flanged gate valves, ball valves, globe valves and check valves,strainers.

Diameter	Nominal Pressure	Test Pressure Range
DN200	10.0-42.0MPa	10.0-55.0MPa
DN250	6.4-42.0MPa	6.4-55.0MPa
DN300	4.0-42.0MPa	4.0-55.0MPa
DN350	2.5-25.0MPa	2.5-30.0MPa
DN400	2.5-25.0MPa	2.5-35.0MPa
DN450	2.5-16.0MPa	2.5-27.0Mpa
DN500	2.5-10.0MPa	2.5-15.0Mpa
DN600	2.5-10.0MPa	2.5-15.0Mpa