Liquid CO2 Gas Transfer/Filling/Booster Pump

• Customization: Available
• Max.Capacity: 50-100 L/min
• Pressure Medium: CO2
• Model NO.: DGS-DGG40
• Certification: CE, ISO
• Theory: Reciprocating Type
• Structure: Piston Pump
• Usage: Air Pump
• Material: Stainless Steel
• Standard or Non: Standard
• Power: Pneumatic
• Boost Ratio: 40:1
• Transport Package: 1 Set/Case by Plywood Case
• Trademark: SUNCENTER
• Origin: China
• Production Capacity: 500 Sets/Month

Product Description

Liquid CO2 gas transfer/filling/booster pump

Suncenter high pressure Liquid CO2 pump

Compressed Air Driven Liquid CO2 Booster Pump-DGG/DGGD Series.
SUNCENTER pumps are air driven at a drive air pressure of 2 to 10bar (29 to145 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios, while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal outlet pressure can be calculated.


Key features include:
 

1. Compressed Air driven - no electricity required (connect to normal air compressor)
2. In order to extend the lifetime of the pump, the driving air pressure should

not be higher than 8 bar

1. No airline lubricator required
2. Wide range of models with different ratios
3. Built-in-cooling on most models
4. Easy to install, operate and maintain
5. Best price / performance ratio
6. No heat, flame or spark risk and explosion proof
7. Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter   pump will automatically start, keep the loop pressure constant

DGG Series Liquid CO2 Booster Pumps


Technical specification
 

Model	Pressure  Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)
DGG6	6:1	3-8 bar	6XPL	48	NPT1/2	NPT1/2	29.91
DGG10	10:1	3-8 bar	10XPL	80	NPT1/2	NPT1/2	18.84
DGG16	16:1	3-8 bar	16XPL	128	NPT1/2	NPT1/2	12.42
DGG28	28:1	3-8 bar	28XPL	224	NPT1/2	NPT1/2	7.11
DGG40	40:1	3-8 bar	40XPL	320	NPT1/2	NPT1/2	4.89
DGG64	64:1	3-8 bar	64XPL	512	NPT1/2	NPT3/8	3.08
DGG80	80:1	3-8 bar	80XPL	640	NPT1/2	NPT3/8	2.44
DGG100	100:1	3-8 bar	100XPL	800	NPT1/2	NPT3/8	1.92
DGG130	130:1	3-8 bar	130XPL	1040	NPT1/2	M14X1.5	1.47
DGG175	175:1	3-8 bar	175XPL	1400	NPT3/8	M14X1.5	1

DGGD Series Liquid CO2 Pumps(Double acting)






Technical specification
 

Model	Pressure  Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	3-8 bar	4XPL	32	NPT1/2	NPT1/2	70.00
DGGD6	6:1	3-8 bar	6XPL	48	NPT1/2	NPT1/2	48.60
DGGD10	10:1	3-8 bar	10XPL	80	NPT1/2	NPT1/2	30.61
DGGD16	16:1	3-8 bar	16XPL	128	NPT1/2	NPT1/2	19.73
DGGD28	28:1	3-8 bar	28XPL	224	NPT1/2	NPT1/2	11.30
DGGD40	40:1	3-8 bar	40XPL	320	NPT1/2	NPT3/8	7.69
DGGD64	64:1	3-8 bar	64XPL	512	NPT1/2	NPT3/8	4.94
DGGD80	80:1	3-8 bar	80XPL	640	NPT1/2	NPT3/8	3.96
DGGD100	100:1	3-8 bar	100XPL	800	NPT1/2	NPT3/8	3.13

Max. outlet pressure at an air drive of 8 bar/116 PSI
In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar


Suncenter DGS Series Pneumatic (Air driven) CO2 filling pump system
CO2 Fire Extinguisher filling equipment

SUNCENTER- CO2 filling pump systems are compact and delicacy solution tailored to customer specific requirements with air driven pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.
To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure.
As the pressure will be generated by means of a pneumatically operated pump,the electric connection will not be necessary. To operate this system, the air driven pump have to be equipped with the air control unit combined filter, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel.



DGS booster system = booster pump+ following valves, gages, and parts









The hottest selling- Model C cabinet picture



The standard CO2 gas booster pumps system including following parts:
Air -driven liquid CO2 gas booster pump
Stainless steel (carbon steel) material cabinet
F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
Driven air switch (Pump starting switch), driven air pressure gauge
Gas inlet switch, Gas inlet pressure gauge
Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
And we could also customize it according to clients' special requirement.





Dongguan Suncenter Fluid Control Equipment Co., Ltd is the member company of Suncenter Group, which is located in Dongguan city of Guangdong province in China. With more than 15 years experiences in fluid pressure exchange and controlling field, we provide various kinds of pneumatic and hydraulic booster pumps, systems and solutions to the customers all over the world. Due to our best product quality, competitive price as well as excellent after-sales service, we have win a great reputation in the field.
 
Our main products including:
High Pressure Booster Pumps (Air Driven Gas Booster Pump, Air Driven Liquid Pump, Air Amplifiers)
High Pressure Systems (Gas/Liquid Booster Stations,FM200 filling machine, Tube Expanding Machine)
High Pressure Test Equipment(Hydraulic/Burst/Hydrostatic test machine,Cylinder test machine,
Valve test bench,Impulse Testing Machine, etc.)
 
Product Application
Oil Industry, Gas Industry, Chemical Industry, Fire Fighting, Research Institutions etc.
 
Our service
13 months' free warranty since the purchasing date and free technical support during lifetime