Suncenter Air Driven Chemical Injection Pump
MOQ:1 Set
Brand Name:SUNCENTER
Certificate:ISO/CE/SGS
Warranty:13 Months
Packaging:by Plywood case
Shipping Port: Shenzhen/Hongkong Payment: T/T,Western Union,Credit card.
Transaction method:EXW,FOB,DDP,CIF,CFR
Place of Origin:Guangdong Province, China (Mainland)
Delivery Time:Within 10-15 working days after received deposit.
Compressed Air Driven Liquid Booster Pump-DGM/DGG/DGGD Series
We offer the most complete range of Air driven liquid pump models in the industry measured for:
A. Capability of ultimate pressure, flow or output horsepower.
B. Compatibility with a broad variety of liquids, such as oil, water and chemical applications.
SUNCENTER pumps are air driven at a drive air pressure of 1bar to 8bar (14.5 psi to116 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.
Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios, while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.
SUNCENTER pumps are self priming. In general it is not necessary to use an air line lubricator. The liquid to be pumped flows into the suction chamber by the up-stroke of the drive piston. By this suction effect, the inlet check valve is opened and the outlet check valve is closed. The down-stroke generates the pressure at the liquid side. The inlet check valve is closed and the outlet check valve is opened by the generated pressure. SUNCENTER liquid pumps cycle automatically, where the pressure is built up the numbers of cycles slow down, the pump stops automatically when the output pressure forces are equal. The pump restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. Pump performance can be affected by a number of conditions, such as freezing of muffler or pilot valves (which is caused by moisture in air lines), inadequate inlet air line sizes and dirty filers. Don't reduce the indicated port sizes and consult SUNCENTER for exact flow conditions not shown in charts.
Applications include:
Pressure testing
Burst(Hydrostatic) testing
Work holding/power clamping
Jacking/lifting
Valve actuator control
Hydraulic cylinder actuation
Press safety overload devices
Roller tensioning
Metering
Precision lubrication and spraying
Liquefied gas transfer
Key features include:
Compressed Air driven - no electricity required (connect to normal air compressor)
In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
No airline lubricator required
Pressures to 640Mpa (6400 bar)
Wide range of models with different ratios
Built-in-cooling on most models
Easy to install, operate and maintain
Best price / performance ratio
No heat, flame or spark risk and explosion proof
Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant
DGGD Series Liquid Pumps(Double acting, single air drive head) They are characterized by the same features as the DGG pumps single acting, single air drive head types, but they have less pulsations and deliver approx. 50 % more flow.
The outlet liquid pressure=Driven air pressure*boost ratio In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
How to Select Suncenter Air Driven Liquid Boosters/Systems?
In order to choose suitable liquid booster pump or systems for you, please kindly reply us the following questions:
1.What is the liquid you want to booster?
2. What outlet liquid pressure do you want?( )bar
3. What driven air pressure (of your air compressor) can you offer?( )bar, Because our booster is completely air operated and no need any electricity
4. What outlet liquid flow rate do you need?( )L/min
Suncenter Air Driven Chemical Injection Pump System
Equipment characteristics:
1. Equipped with high quality pneumatic chemical reagent injection pump, can easily achieve the output pressure and flow of any adjustable, controllable;
2.The contact liquid section is stainless steel, strong corrosion resistance, suitable for a variety of chemical reagents; (also can use the gas system)
3.It can be used in a variety of pressure level of the wellhead, the system with the function of the pressure starting;
4.chemical reagent injection system output pressure is high, 6.0-640 MPa is arbitrary, the system has to stop working under the set pressure;
5.advanced technology, reasonable structure design. The features of small size, light weight, beautiful appearance;
6.by air/gas driven, no need to use electricity, there will be no spark generated, safe explosion-proof;
Pneumatic chemical reagent injection pump system-DLS series
The hottest selling Model C cabinet
The standard chemical injection pump system including following parts:
Air -driven liquid booster pump (DGG/DGGD two series for choosing)
Stainless steel (carbon steel) material cabinet (Three models for choosing)
F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
Driven air switch (Pump starting switch), driven air pressure gauge, chemical(water) tank
Liquid inlet/outlet switch, high pressure liquid guage, unloading valve, interconnecting pipes etc.
And we could also customize it according to clients' special requirement.
DLS-GD series Technical specification
Model Pressure Ratio Driven air pressure PL Formula to calculate outlet pressure MAX Outlet
Pressure(bar)* Driven
air inlet port
DLS-GD series Technical specification
| Model |
Pressure Ratio |
Driven air pressure PL |
Formula to calculate outlet pressure |
MAX Outlet
Pressure(bar)* |
Driven
air inlet port
|
High pressure Outlet port |
MAX Flow
(L/min)** |
| DLS-GD6 |
6:1 |
3-8 bar |
6XPL |
48 |
G 1/2 |
NPT/ZG |
48.60 |
| DLS-GD10 |
10:1 |
3-8 bar |
10XPL |
80 |
G 1/2 |
NPT/ZG |
30.61 |
| DLS-GD16 |
16:1 |
3-8 bar |
16XPL |
128 |
G 1/2 |
NPT/ZG |
19.73 |
| DLS-GD28 |
28:1 |
3-8 bar |
28XPL |
224 |
G 1/2 |
NPT/ZG |
11.30 |
| DLS-GD40 |
40:1 |
3-8 bar |
40XPL |
320 |
G 1/2 |
NPT/ZG |
7.69 |
| DLS-GD64 |
64:1 |
3-8 bar |
64XPL |
512 |
G 1/2 |
NPT/ZG |
4.94 |
| DLS-GD80 |
80:1 |
3-8 bar |
80XPL |
640 |
G 1/2 |
NPT/ZG |
3.96 |
| DLS-GD100 |
100:1 |
3-8 bar |
100XPL |
800 |
G 1/2 |
NPT/ZG |
3.13 |
| DLS-GD130 |
130:1 |
3-8 bar |
130XPL |
1040 |
G 1/2 |
NPT/ZG |
2.40 |
| DLS-GD175 |
175:1 |
3-8 bar |
175XPL |
1400 |
G 1/2 |
NPT/ZG |
1.81 |
| DLS-GD255 |
255:1 |
3-8 bar |
255XPL |
2040 |
G 1/2 |
NPT/ZG |
1.23 |
| DLS-GD400 |
400:1 |
3-8 bar |
400XPL |
3200 |
G 1/2 |
NPT/ZG |
0.79 |
Dongguan Suncenter Fluid Control Equipment Co., Ltd is the member company of Suncenter Group, which is located in Dongguan city of Guangdong province in China. With more than 15 years experiences in fluid pressure exchange and controlling field, we provide various kinds of pneumatic and hydraulic booster pumps, systems and solutions to the customers all over the world. Due to our best product quality, competitive price as well as excellent after-sales service, we have win a great reputation in the field.
Our main products including:
High Pressure Booster Pumps (Air Driven Gas Booster Pump, Air Driven Liquid Pump, Air Amplifiers)
High Pressure Systems (Gas/Liquid Booster Stations,FM200 filling machine, Tube Expanding Machine)
High Pressure Test Equipment(Hydraulic/Burst/Hydrostatic test machine,Cylinder test machine,
Valve test bench,Impulse Testing Machine, etc.)
Product Application
Oil Industry, Gas Industry, Chemical Industry, Fire Fighting, Research Institutions etc.
Our service
13 months' free warranty since the purchasing date and free technical support during lifetime
Audited Supplier 
){kind=link}